Mortar conveying equipment generates should be immediately stopped plugging new mortar spraying machine, release the interface mortar spraying machine model horizontal and vertical pipe connections, you can try to start again small mortar spraying machine conveying equipment, horizontal tube plugging are minor start the machine again by exclusion. Plugging in the elbow or vertical position, vertical position can only plugging washed with water pipes generally exclude mortar spraying machine, select the appropriate hose flushing process should be bottom up to wash, the vertical distance is too high When, also breaking the middle part of the pipeline processing, the intermediate pipeline should dismantle safety. After washing is completed Refit pipeline should begin treatment before transporting mortar tube Run again. Mortar spraying machine spraying a small amount of air pressure in the discharge port problem is not normal but also prone to the phenomenon of uneven material, you can check whether the normal operation of the air compressor, pressure air compressors and spray equipment is set to match. Supporting the compressor working pressure under normal circumstances screw spraying equipment between 0.4-0.6MPa. Check the air compressor at the same time, the need to check the pipe for leaks, the gas needle is blocked. Mortar spraying machine brand mortar spraying machine _ _ Luohe Hongda Xinxiang City Hongda environmental protection provided by energy saving equipment Limited. Xinxiang City Hongda energy saving equipment Limited (www.xxhdjnhb.com) strong, credible, in Xinxiang mortar industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead HTC into the brilliant green and you work for a better future!