Mortar spraying machine common fault of electrical tripping problems and solutions so-called dry mortar sprayer trip means leakage, short circuit, phase sequence can not be effectively protected. If the work can not start the motor is generally the case of site wiring problem caused by the trip. First of all we need to know leakage protection works - flows through the zero line and ground currents will not be equal to the trip. Refuting the zero line to ground line is equal to the current zero line portion allocated out to the ground. The current that flows through the hot and neutral lines is not equal to the external wall insulation mortar spraying machine, the protector will trip. Mortar spraying machine (also called mortar spray pump) with advanced technology interior mortar spraying machine, reasonable structure, stable performance, easy operation and maintenance, long service life. Then, the operation of the machine to Notes, gun dedicated high pressure hose may not be any alternative, hose fittings should have a predetermined strength of a conductive material, which does not exceed the maximum resistance 1M. Work before the mortar spraying machine, check the motor, electrical, body should be grounded (connected zero) is good, check the suction hose, hose fittings and pressure gauge circuits, high pressure hose and spray gun, etc. should be securely connected. Should be no-load operation, and then use the water or solvent operated normal. Interior mortar spraying machine, spraying machine Henan mortar, HTC environmental protection provided by the Xinxiang City Hongda energy saving equipment Limited. Xinxiang City Hongda energy saving equipment Limited (www.xxhdjnhb.com) strong, credible, in Xinxiang mortar industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead HTC into the brilliant green and you work for a better future!