Operation After work had to wait more than expected in the best hopper mortar spray gun, hopper enough to inject water, clean the hopper and turn the squeeze mortar pump sprayer, hose and nozzle cleaning pneumatic mortar sprayer until the pump out full of water, so as I kind of solidified material in the hose, the hose and nozzle clogging. Downtime for too long, wipe clean the machine and remove the screw supercharger, after oiling, safekeeping, reinstall use. Insufficient pressure, adjust or replace the booster booster stator bolt sleeve and booster pump out the worm appears to work. Before spraying, spraying area should be subject to water penetration; and by the spray nozzle as vertical surface (distance can be adjusted according to their own spray effect) stratified uniform spraying mortar spraying machine, and income level, and coordinated the injection process. After spraying the wall is too dry or too long will seriously affect the income level effect, to change the process. Normal spraying mortar spraying machine, such as the case of the gun to produce mortar mouth atomized flow is not normal, usually for several reasons: low voltage will cause a small amount of spray, sometimes resulting in high gear can not be used. In this case you should first identify the reason for the low voltage, select the appropriate section of the power line according to the distance of transmission lines and power spray equipment is also very important. Extrusion mortar spraying machine mortar spraying machine _ _ Hubei environmental protection provided by Xinxiang HTC HTC energy saving equipment Limited. Xinxiang City Hongda energy saving equipment Limited (www.xxhdjnhb.com) strong, credible, Xinxiang in Henan mortar industry has accumulated a large number of loyal customers. The company better work attitude and constantly improving innovative ideas will lead HTC into the brilliant green and you work for a better future!